Common Troubleshooting Tips for New PCs

Common Troubleshooting Tips for New PCs

When receiving a new PC, it is essential to have some troubleshooting knowledge and understand your system’s requirements. Using Apex Gaming PCs as an example, we follow industry-standard packing and support techniques to ensure the safe travel of all PC components for domestic and worldwide shipping.

After taking the PC out of its case box and removing the insta-pack inside, issues like no power distribution, no display, poor to no WiFi connection, or other miscellaneous come up between shipping and initially setting up a PC.

Understanding the issue can take some time, so here are some quick tips for diagnosing and troubleshooting a new PC.

 

Common Issues In Initial Setup 

When setting up a PC, it is crucial to have all the necessary components to turn on and ensure everything works. You will need the following:

 three-pin wall power connector- A three-pin connection is used on a power supply (PSU) to provide the PC power from the wall. Depending on your preference, it should be plugged into the wall/surge protector/UPS (Uninterruptible power supply). High-end Surge Protectors and UPS's provide more security in a power outage and are preferable to plugging cables directly into a wall outlet.

A DisplayPort/HDMI Cable- If you have a modern monitor, there is a significant chance there will be HDMI or DisplayPort. Depending on the capabilities of your connection, the maximum frame rate may differ depending on your monitor's specifications per connection. Look at this blog covering connectors and displays supported for more information. 

A keyboard and mouse- A keyboard and mouse are necessary to interact with a PC. When setting up a PC for the first time, some Bluetooth devices may only function once Windows can update devices. If this becomes an issue, use a wired keyboard and mouse for the initial setup before switching to wireless.

An Internet connection- When setting up a new PC, Microsoft dedicates communication for windows installs to notify users when an update is present for windows/drivers/and the internet. This can happen in one of two ways, an Ethernet connection or a WiFi connection. Ethernet is preferable depending on the modem's proximity; WiFi works to connect to the internet but at different speeds than Ethernet.

Going Through Symptoms of Common PC Issues

We will get into common issues exhibited after the initial setup with the accessories above.

My PC is plugged in but won’t turn on.

Solutions:

  • The switch at the back of the PSU should be in the ON or “I” position and not the OFF or “O.”
    •
  • Check to ensure no connections to the motherboard are loose or undone from shipping. Some necessary connections are the 24-pin power connector and the front panel power connector responsible for the power button. 
    •
  • Ensure that the RAM is fully secured, as shipping could cause unseated RAM. Here is a helpful video on how to reseat RAM in a PC. 

    • My PC powers on, but my monitor has no display.

    Solutions:

     

  • Check that the HDMI Or Display Port isn't plugged into the motherboard and instead goes into the dedicated GPU.. (Integrated graphics is exempt from this as there is no dedicated GPU in the system)
  • Check that the monitor has power and is in an ideal state and that the connections are secure in the back. If one connection is having issues try a different port or cable. 
    •
  • (Optional) If your motherboard has debug lights, see what light the motherboard holds on. That component will be the source of the computer's inability to boot.
    •

     

    My PC turns on, then turns off and back on in the same loop.

    Solutions:

  • Unplug the PSU chord from the wall and press the power button for at least 10 seconds. Then try again.
    •
  • If this continues, check that the 24-pin power connector is securely seated along with the CPU power connector(both plastic clips should clasp the corresponding clip on the motherboard) and turn the system on afterward.
    •
  • The next step is to reseat your RAM in their sockets.
    •
  • The final cause of power cycling is an internal error with the motherboard or power supply unit, which requires an RMA process.  

    • Everything boots on my PC. However, I cannot get the WiFi to connect.

    Solutions:

  • Try plugging the WiFi adapter into a different USB connector, preferably on the front of the case.
    •
  • To find our Apex Gaming PCs wireless USB, type in “device manager” into the windows search bar and look for the network adapter (For USB adapters, there is usually a name designation of USB/Wireless or something similar.) Right-click it and select uninstall. Then restart your computer.
    •

    Wrapping Up The Initial Setup Of The PC

    Whether setting up an older second-hand PC or a brand new one straight from Apex for the first time, it can be nerve-racking and exciting. Going through the steps above is easy to rule out most issues that users can fix without removing components from your system.

    If the above steps solve any issues, you now have a gaming-ready PC! To start customizing your operating system and preferences, look at this tutorial for basic customization of Windows 11.

    If you need help with any issues listed above or feel that more guidance is needed, please email Support@ApexGamingPCs.com or call (215)-565-1069. We have a team of capable representatives able to assist with your issue. We hope to serve at Apex Gaming PCs for your support needs! 


    Written by William Wilson
    Header Photo Credits: Pavan Bhakta

    Related Articles:
    How To Tell If A CPU Is Bad?
    How Long Does A Gaming PC Last?
    How To Tell If Your Graphics Card Is Dying?



    Leave a comment

    Please note, comments must be approved before they are published

    Back to Apex Gaming PCs Blog